1. Triangle Tube Smart 120 Install Manual
2. Lepa Aquachanger 120 Install

Hi there i recently dnld alcohol120 latest edition(1.9.8.7117)but iam not able to install it on ma pc it start instalation and ask for reboot n after rebootin the pc it asks again to reboot n am not able to install that iam usin the older version on my xp machine that works smoothly plz help to fix. Lks matematika sd kelas 3. Jul 14, 2010  During the un-install and re-install of Alcohol I had to restart several times as well, but that didn't solve it initially, so the reboot cannot have been the only resolving issue. At a loss (as with several other Win7 issues). Just to let anyone concerned know, I sent an email to Alcohol Software and got this response.IT DOES WORK, you just need to follow these steps. All credit goes to David from Alcohol Software:) Presently Alcohol is not compatible with Windows 8, we are testing a compatible version now and hope to release it shortly.

Triangle Tube Smart 120 Install Manual

User Guide

Advertisement

Related Manuals for Zebra ZT510

• Printer Zebra Silverline ZT410 User Manual
  Rfid printer, media printing solution (199 pages)
• Printer Zebra ZT400 Quick Reference Manual
  (16 pages)
• Printer Zebra ZT210 User Manual
  (168 pages)

• Printer Zebra Z4M User Manual
  (58 pages)
• Printer Zebra Z4M User Manual
  (104 pages)
• Printer Zebra Z4M Maintenance Manual
  (157 pages)

Summary of Contents for Zebra ZT510

Lepa Aquachanger 120 Install

• Page 1: User Guide

  ZT510 Industrial Printer User Guide P1095460-001..
• Page 2 (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

• Page 3: Declaration Of Conformity

  Declaration of Conformity Declaration of Conformity We have determined that the Zebra printers identified as the ZT510™ manufactured by: Zebra Technologies Corporation 3 Overlook Point Lincolnshire, Illinois 60069 U.S.A. Have been shown to comply with the applicable technical standards of the FCC..

• Page 4: Compliance Information

  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canadian DOC Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. P1095460-001 ZT510 User Guide 6/28/17..

• Page 5: Table Of Contents

  Contents Declaration of Conformity ..... . . 3 Compliance Information .
• Page 6 Install Zebra Setup Utilities ....
• Page 7 MIN SECURITY MODE .....178 6/28/17 ZT510 User Guide P1095460-001..
• Page 8 Exercise 3: Copy Files to/from a USB Flash Drive ...254 Exercise 4: Enter Data for a Stored File with a USB Keyboard and Print a Label . . 256 P1095460-001 ZT510 User Guide 6/28/17..
• Page 9 Index ......275 6/28/17 ZT510 User Guide P1095460-001..
• Page 10 Contents ___________________________________________________________________ Notes • __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ P1095460-001 ZT510 User Guide 6/28/17..

• Page 11: About This Document

  About This Document This section provides you with contact information, document structure and organization, and additional reference documents. Contents Who Should Use This Document ..... . . 12 How This Document Is Organized .

• Page 12: Who Should Use This Document

  This section will help you to learn how to use an Using a USB Host Port and the NFC Capabilities on page 247 optional USB host port on your Zebra printer and how to use the printer’s Near Field Communication (NFC) capability. The information is presented in the form of exercises with some SGD commands listed for advanced users.

• Page 13: Introduction

  Introduction This section provides a high-level overview of the printer and its components. Contents Printer Options ......15 Communication Interfaces .

• Page 14: Printer Components

  Figure 1 • Printer Components Media door Printhead-open lever Printhead pressure toggles Ribbon take-up spindle Control panel display Ribbon supply spindle Printhead assembly Media dancer assembly Control panel Media supply guide Platen roller Media supply spindle P1095460-001 ZT510 User Guide 6/28/17..

• Page 15: Printer Options

  Select a Print Mode on page Figure 2 • Printer Options Tear-Off (standard) Cutter option Rewind option set for Peel mode Rewind option set for Rewind mode 6/28/17 ZT510 User Guide P1095460-001..

• Page 16: Communication Interfaces

  • For instructions on when and how to connect your computer to one ore more of these communication interfaces, see Install the Printer Driver and Connect the Printer to the Computer on page Figure 3 • Location of Communication Interfaces Parallel port Internal wired Ethernet print server Serial port USB port P1095460-001 ZT510 User Guide 6/28/17..

• Page 17: Data Cables

  To minimize electrical noise pickup in the cable: • Keep data cables as short as possible. • Do not bundle the data cables tightly with the power cords. • Do not tie the data cables to power wire conduits. 6/28/17 ZT510 User Guide P1095460-001..

• Page 18: Standard Control Panel

  The CANCEL button cancels label formats when the printer is paused. Press once to cancel the next label format. • Press and hold for 2 seconds to cancel all label • formats. P1095460-001 ZT510 User Guide 6/28/17..

• Page 19: Navigating Through Screens In The Standard Display

  ARROW buttons returns to the Idle Display after When an icon is selected, its 15 seconds of inactivity in the colors are reversed to highlight it. Home menu. SETTINGS menu icon SETTINGS menu icon highlighted 6/28/17 ZT510 User Guide P1095460-001..
• Page 20 Menu Shortcuts To go to the next user menu from a menu shortcut, To continue to navigate in the same user menu, press press or press to select RIGHT SELECT LEFT ARROW RIGHT ARROW P1095460-001 ZT510 User Guide 6/28/17..

• Page 21: Idle Display, Home Menu, And User Menus In The Standard Display

  Adjust Printer Settings on page 106). Click any of the icons Figure 6 to go to the descriptions of the menu items for that user menu. Figure 6 • Home Menu Exit and return to the Idle Display (Figure 6/28/17 ZT510 User Guide P1095460-001..

• Page 22: Types Of Media

  Introduction Types of Media Types of Media Zebra strongly recommends the use of Zebra-brand supplies for continuous Important • high-quality printing. A wide range of paper, polypropylene, polyester, and vinyl stock has been specifically engineered to enhance the printing capabilities of the printer and to prevent premature printhead wear.
• Page 23 Continuous roll media does not have gaps, holes, notches, or black marks to indicate label separations. This allows the image to be printed anywhere on the label. Sometimes a cutter is used to cut apart individual labels. 6/28/17 ZT510 User Guide P1095460-001..

• Page 24: Ribbon Overview

  7). This printer can only use ribbon that is coated on the outside unless you purchase and install the optional spindle that allows ribbon that is coated on the inside. Contact your authorized Zebra reseller for ordering information. If you are unsure which side of a particular roll of ribbon is coated, perform an adhesive test or a ribbon scratch test to determine which side is coated.
• Page 25 An optional ribbon spindle is available to use ribbon that is coated on the inside. Contact your authorized Zebra reseller for ordering information. To verify this result, repeat the test on the other surface of the roll of ribbon.
• Page 26 An optional ribbon spindle is available to use ribbon that is coated on the inside. Contact your authorized Zebra reseller for ordering information. To verify this result, repeat the test on the other surface of the roll of ribbon.

• Page 27: Printer Setup And Operation

  Install Zebra Setup Utilities ....

• Page 28: Handling The Printer

  • Model number or product name • Firmware version number Zebra responds to calls by e-mail, telephone, or fax within the time limits set forth in service agreements. If your problem cannot be solved by Zebra Global Customer Support, you may need to return your equipment for servicing and will be given specific directions.

• Page 29: Ship The Printer

  Printer Setup and Operation Handling the Printer Ship the Printer Zebra is not responsible for any damages incurred during shipment if an approved shipping container is not used. Shipping the units improperly can possibly void the warranty. If you must ship the printer: •..

• Page 30: Select A Location For The Printer

  Table 3 • Operating Temperature and Humidity Mode Temperature Relative Humidity Thermal Transfer 40° to 104°F (5° to 40°C) 20 to 85% non-condensing Direct Thermal 32° to 104°F (0° to 40°C) P1095460-001 ZT510 User Guide 6/28/17..

• Page 31: Select A Print Mode

  This mode is for use with a machine that applies labels. The printer prints when it receives a signal from the applicator. Refer to the Advanced User Information section of the Maintenance Manual for additional information about the applicator interface. 6/28/17 ZT510 User Guide P1095460-001..

• Page 32: Load The Media

  You are not required to turn off the printer power when working near an open printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose all temporary settings, such as label formats, and you must reload them before you resume printing.
• Page 33 Place the roll of media on the media supply hanger. Push the roll back as far as it will go. Rear Feed Bottom Feed 6/28/17 ZT510 User Guide P1095460-001..
• Page 34 Pull out the media supply guide as far as it touches the edge of the roll. goes. Drape the media over the media supply hanger. Slide in the media supply guide until it touches the edge of the media. P1095460-001 ZT510 User Guide 6/28/17..
• Page 35 Tear-Off Mode on page Continue with PEEL-OFF APPLICATOR Peel-Off Mode or Applicator Mode on page Continue with REWIND Rewind Mode on page Continue with CUTTER DELAYED CUT Cutter Mode or Delayed Cut Mode on page 6/28/17 ZT510 User Guide P1095460-001..

• Page 36: Tear-off Mode

  Insert the Media into the Printer on page Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool. Open the printhead assembly by rotating the printhead-open lever upward. P1095460-001 ZT510 User Guide 6/28/17..
• Page 37 Printer Setup and Operation Load the Media—Tear-Off Mode Loosen the thumb screw that is located on the bottom of the outer media guide ( Slide the outer media guide all the way out. 6/28/17 ZT510 User Guide P1095460-001..
• Page 38 Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool. Push the media forward until it passes under the printhead assembly ( ), under the snap plate ( ), and then over the platen roller ( P1095460-001 ZT510 User Guide 6/28/17..
• Page 39 Push back the media as far as it goes, and then slide in the outer media guide until it just touches the edge of the media. Tighten the thumb screw that is located on the bottom of the outer media guide. 6/28/17 ZT510 User Guide P1095460-001..
• Page 40 Calibrate the Ribbon and Media Sensors on page 179. If desired, print a configuration or other label to verify that your printer is able to print. (See PRINT INFORMATION on page 119.) Media loading in Tear-Off mode is complete. P1095460-001 ZT510 User Guide 6/28/17..

• Page 41: Peel-off Mode Or Applicator Mode

  If you have not already done so, follow the instructions in the section Insert the Media into the Printer on page If necessary, install the rewind/liner take-up plate in the peel-off position as shown. See Install the Rewind/Liner Take-Up Plate on page 192 for instructions. 6/28/17 ZT510 User Guide P1095460-001..
• Page 42 Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool. Open the printhead assembly by rotating the printhead-open lever upward. Loosen the thumb screw that is located on the bottom of the outer media guide. P1095460-001 ZT510 User Guide 6/28/17..
• Page 43 ( Make sure that you thread the media under these components. If you thread Important • the media over them, the media obstructs the ribbon sensor and causes a false RIBBON OUT error. 6/28/17 ZT510 User Guide P1095460-001..
• Page 44 ( ), and then over the platen roller ( Extend approximately 18 in. (500 mm) of media out of the printer. Remove and discard the labels from this exposed media, leaving just the liner. P1095460-001 ZT510 User Guide 6/28/17..
• Page 45 Load the Media—Peel-Off Mode or Applicator Mode Feed the liner behind the rewind/liner take-up plate. If desired, slide a core onto the rewind spindle until it is flush against the guide plate. A core is not necessary for liner take-up. 6/28/17 ZT510 User Guide P1095460-001..
• Page 46 Reinstall the spindle hook over the liner. Insert the long end of the hook into the small hole on the guide plate ( ). Insert the short end of the hook into the hole in the center of the adjusting nut ( P1095460-001 ZT510 User Guide 6/28/17..
• Page 47 Push back the media as far as it goes, and then slide in the outer media guide until it just touches the edge of the media. Tighten the thumb screw that is located on the bottom of the outer media guide. 6/28/17 ZT510 User Guide P1095460-001..
• Page 48 Calibrate the Ribbon and Media Sensors on page 179. If desired, print a configuration or other label to verify that your printer is able to print. (See PRINT INFORMATION on page 119.) Media loading in Peel-Off mode is complete. P1095460-001 ZT510 User Guide 6/28/17..

• Page 49: Rewind Mode

  If you have not already done so, follow the instructions in the section Insert the Media into the Printer on page If necessary, install the rewind/liner take-up plate in the rewind position as shown. See Install the Rewind/Liner Take-Up Plate on page 192 for instructions. 6/28/17 ZT510 User Guide P1095460-001..
• Page 50 Slide a core onto the rewind spindle until it is flush against the guide plate. Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool. Open the printhead assembly by rotating the printhead-open lever upward. P1095460-001 ZT510 User Guide 6/28/17..
• Page 51 Printer Setup and Operation Load the Media—Rewind Mode Loosen the thumb screw that is located on the bottom of the outer media guide ( Slide the outer media guide all the way out. 6/28/17 ZT510 User Guide P1095460-001..
• Page 52 Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool. Push the media forward until it passes under the printhead assembly ( ), under the snap plate ( ), and then over the platen roller ( P1095460-001 ZT510 User Guide 6/28/17..
• Page 53 Printer Setup and Operation Load the Media—Rewind Mode Extend approximately 18 in. (500 mm) of media out of the printer. Feed the media over the rewind/liner take-up plate. 6/28/17 ZT510 User Guide P1095460-001..
• Page 54 Direct Thermal media (no ribbon needed) Continue with step Thermal Transfer media (ribbon needed) If you have not already done so, load ribbon in the printer. See Load the Ribbon on page Continue with step P1095460-001 ZT510 User Guide 6/28/17..
• Page 55 Push back the media as far as it goes, and then slide in the outer media guide until it just touches the edge of the media. Tighten the thumb screw that is located on the bottom of the outer media guide. 6/28/17 ZT510 User Guide P1095460-001..
• Page 56 Calibrate the Ribbon and Media Sensors on page 179. If desired, print a configuration or other label to verify that your printer is able to print. (See PRINT INFORMATION on page 119.) Media loading in Rewind mode is complete. P1095460-001 ZT510 User Guide 6/28/17..

• Page 57: Cutter Mode Or Delayed Cut Mode

  Insert the Media into the Printer on page Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool. Open the printhead assembly by rotating the printhead-open lever upward. 6/28/17 ZT510 User Guide P1095460-001..
• Page 58 Printer Setup and Operation Load the Media—Cutter Mode or Delayed Cut Mode Loosen the thumb screw that is located on the bottom of the outer media guide ( Slide the outer media guide all the way out. P1095460-001 ZT510 User Guide 6/28/17..
• Page 59 Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. Push the media forward until it passes under the printhead assembly ( ), under the snap plate ( ), and then through the cutter assembly ( 6/28/17 ZT510 User Guide P1095460-001..
• Page 60 Push back the media as far as it goes, and then slide in the outer media guide until it just touches the edge of the media. Tighten the thumb screw that is located on the bottom of the outer media guide. P1095460-001 ZT510 User Guide 6/28/17..
• Page 61 Calibrate the Ribbon and Media Sensors on page 179. If desired, print a configuration or other label to verify that your printer is able to print. (See PRINT INFORMATION on page 119.) Media loading in Cutter mode is complete. 6/28/17 ZT510 User Guide P1095460-001..

• Page 62: Load The Ribbon

  You are not required to turn off the printer power when working near an open printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose all temporary settings, such as label formats, and you must reload them before you resume printing.
• Page 63 Align the segments of the ribbon supply spindle. Place the roll of ribbon on the ribbon supply spindle with the loose end of the ribbon unrolling as shown. Push the roll back as far as it will go. 6/28/17 ZT510 User Guide P1095460-001..
• Page 64 4 - 6 in. 100 - 150 mm Peel a label from the media strip. Use this label to attach the end of the ribbon to the media strip. The media strip acts as a ribbon leader. P1095460-001 ZT510 User Guide 6/28/17..
• Page 65 ) and then under the ribbon take-up spindle ( ). Wrap the leader and the ribbon around the ribbon take-up spindle as shown. Rotate the spindle several turns to wind the ribbon and remove any slack. 6/28/17 ZT510 User Guide P1095460-001..
• Page 66 Load the Media on page 32 to load media in the printer. Rotate the printhead-open lever downward until it locks the printhead in place. Close the media door. If necessary, press to enable printing. PAUSE P1095460-001 ZT510 User Guide 6/28/17..

• Page 67: Install The Printer Driver And Connect The Printer To The Computer

  Install the Printer Driver and Connect the Printer to the Computer Install the Printer Driver and Connect the Printer to the Computer In this section, you are shown how to use the Zebra Setup Utilities program to prepare a ® computer running Microsoft Windows for the printer driver before connecting the printer to any of the computer’s data communication interfaces.
• Page 68 You are prompted to read and accept the End User License Agreement (EULA). If you agree with the terms of the EULA, click ACCEPT AND BEGIN DOWNLOAD NOW Depending on your browser, you are given options to run or save the executable file. P1095460-001 ZT510 User Guide 6/28/17..
• Page 69 Run the executable file. If your computer prompts you for permission to run the file, click the appropriate button to allow it to run. What the computer displays next depends on whether Zebra Setup Utilities was already installed. Follow the instructions based on what your computer prompts you to do.
• Page 70 Printer Setup and Operation Install the Printer Driver and Connect the Printer to the Computer New Installations of Zebra Setup Utilities Click Next. You are prompted again to read and accept the End User License Agreement (EULA). If you agree with the terms of the EULA, check the box that says I accept the terms of the license agreement Click Next.
• Page 71 You are prompted to select a location for program shortcuts. Change the location, if desired, and then click Next. You are prompted to complete the InstallAware wizard. Skip to Continuing with New or Updated Installations on page 6/28/17 ZT510 User Guide P1095460-001..
• Page 72 Printer Setup and Operation Install the Printer Driver and Connect the Printer to the Computer Updating Existing Installations of Zebra Setup Utilities Click Next. You are prompted to choose the features that you would like to install. Click Next. You are prompted to complete the InstallAware wizard.
• Page 73 Continuing with New or Updated Installations Click Next. Installation begins. During installation, you are presented with information about drivers. Read the information, and then check the box that says “I have read the information above”. 6/28/17 ZT510 User Guide P1095460-001..
• Page 74 Check the box that says “Run Zebra Setup Utilities now.” Click Finish. What the computer displays next depends on whether any Zebra printer drivers are already installed on your computer. Follow the instructions based on what your computer displays. If your computer..
• Page 75 Continue with USB port Connecting the printer to a USB port on your computer on page Continue with Serial or optional Adding a Printer from the Zebra Setup Utilities Screen on page parallel port 6/28/17 ZT510 User Guide P1095460-001..

• Page 76: Connect A Computer To The Printer's Usb Port

  To connect the printer to your computer by USB, complete these steps: Running the System Prepare Wizard If you are at the Zebra Setup Utilities screen, you do not need to complete this section. Continue with Connecting the printer to a USB port on your computer on page The first time that you install the Zebra Setup Utilities program and printer drivers, you are prompted to follow the System Prepare Wizard.
• Page 77 Complete the steps in this section only after the System Prepare Wizard prompts you to do so or after you have opened the Zebra Setup Utilities program. If necessary, complete the steps in Install Zebra Setup Utilities on page 67 before continuing.
• Page 78 Plug the female end of the A/C power cord into the A/C power connector on the back of the printer. Plug the male end of the A/C power cord into an appropriate power outlet. 100 – 240 VAC 50 – 60 Hz P1095460-001 ZT510 User Guide 6/28/17..
• Page 79 Install the Printer Driver and Connect the Printer to the Computer—USB Turn on ( ) the printer. As the printer boots up, your computer completes the driver installation and recognizes your printer. The installation for the USB connection is complete. 6/28/17 ZT510 User Guide P1095460-001..

• Page 80: Connect A Computer To The Printer's Serial Or Parallel Port

  To connect the printer to your computer by USB, complete these steps: If you are at the Zebra Setup Utilities screen, you do not need to complete this section. Continue with Adding a Printer from the Zebra Setup Utilities Screen on page..
• Page 81 Install the Printer Driver and Connect the Printer to the Computer—Serial or Parallel Select “Other computer ports (Parallel Port, Serial Port, TCP-IP Port, ..), and then click Next. The new printer wizard prompts you to begin the installation procedure. Click Finish. The printer driver wizard displays. 6/28/17 ZT510 User Guide P1095460-001..
• Page 82 Printer Setup and Operation Install the Printer Driver and Connect the Printer to the Computer—Serial or Parallel Click Next. You are prompted to select an installation option. Continue with step 6 on page P1095460-001 ZT510 User Guide 6/28/17..
• Page 83 Install the Printer Driver and Connect the Printer to the Computer—Serial or Parallel Adding a Printer from the Zebra Setup Utilities Screen Figure 11 • Zebra Setup Utilities Screen On the Zebra Setup Utilities screen, click Install New Printer. You are prompted to select an installation option. 6/28/17..
• Page 84 Y = the printer resolution (2 = 203 dpi, 3 = 300 dpi) For example, in the part number ZT510x3 – xxxxxxxx ZT510 indicates that the printer is a ZT510 model 3 indicates that the printhead resolution is 300 dpi Click Next.
• Page 85 Click Next. You are prompted to launch other setup wizards. Check the desired options, and then click Finish. The printer driver is installed. If you are prompted that other programs might be affected, click Next. 6/28/17 ZT510 User Guide P1095460-001..
• Page 86 Plug the female end of the A/C power cord into the A/C power connector on the back of the printer. Plug the male end of the A/C power cord into an appropriate power outlet. 100 – 240 VAC 50 – 60 Hz P1095460-001 ZT510 User Guide 6/28/17..
• Page 87 Configuring the printer (if necessary) If necessary, adjust the printer’s port settings to match those of your computer. For more information, see PORTS on page 107. The installation for serial or parallel connections is complete. 6/28/17 ZT510 User Guide P1095460-001..

• Page 88: Connect To Your Network Through The Printer's Ethernet Port

  Local Area Network (LAN) through the printer’s wired print server. For additional information about Zebra print servers, refer to the ZebraNet Wired and Wireless Print Server User Guide. To download the latest version of this guide, go to http://www.zebra.com/zt500-info.
• Page 89 If the printer’s IP address is.. Then.. Continue with 0.0.0.0 Configuring the printer with your LAN information (if necessary) on page 000.000.000.000 Continue with any other value Adding a Printer from the Zebra Setup Utilities Screen on page 6/28/17 ZT510 User Guide P1095460-001..
• Page 90 Connect a Computer to the Printer’s Serial or Parallel Port on page Configure the following printer settings. You can change the values through the Zebra Setup Utilities (click Configure Printer Connectivity on the Zebra Setup Utilities screen) or by the ways listed at the following links. Contact your network administrator for the proper values for your network.
• Page 91 Printer Setup and Operation Install the Printer Driver and Connect the Printer to the Computer—Ethernet Adding a Printer from the Zebra Setup Utilities Screen If necessary, open the Zebra Setup Utilities program. The Zebra Setup Utilities screen displays. Figure 12 • Zebra Setup Utilities Screen Click Install New Printer.
• Page 92 Y = the printer resolution (2 = 203 dpi, 3 = 300 dpi) For example, in the part number ZT510x3 – xxxxxxxx ZT510 indicates that the printer is a ZT510 model 3 indicates that the printhead resolution is 300 dpi..
• Page 93 If you have other applications open, you may be prompted that the driver is Note • locked by another process. You may click Next to continue or Exit to allow you to save your work before continuing with this installation. 6/28/17 ZT510 User Guide P1095460-001..
• Page 94 Click OK. A printer driver is created with the port name that you assigned. The new printer port appears in the list of available ports. Click Next. You are prompted to launch other setup wizards. P1095460-001 ZT510 User Guide 6/28/17..
• Page 95 Check the desired options, and then click Finish. The printer driver is installed. If you are prompted that other programs might be affected, click the appropriate option to continue. The installation for wired (Ethernet) connections is complete. 6/28/17 ZT510 User Guide P1095460-001..

• Page 96: Connect The Printer To Your Wireless Network

  Connect a Computer to the Printer’s Serial or Parallel Port on page Configure the following printer settings. You can change the values through the Zebra Setup Utilities (click Configure Printer Connectivity on the Zebra Setup Utilities screen) or by the ways listed at the following links. Contact your network administrator for the proper values for your network.
• Page 97 Printer Setup and Operation Install the Printer Driver and Connect the Printer to the Computer—Wireless Adding a Printer from the Zebra Setup Utilities Screen If necessary, open the Zebra Setup Utilities program. The Zebra Setup Utilities screen displays. Figure 13 • Zebra Setup Utilities Screen Click Install New Printer.
• Page 98 Y = the printer resolution (2 = 203 dpi, 3 = 300 dpi) For example, in the part number ZT510x3 – xxxxxxxx ZT510 indicates that the printer is a ZT510 model 3 indicates that the printhead resolution is 300 dpi..
• Page 99 If you have other applications open, you may be prompted that the driver is Note • locked by another process. You may click Next to continue or Exit to allow you to save your work before continuing with this installation. 6/28/17 ZT510 User Guide P1095460-001..
• Page 100 Click OK. A printer driver is created with the port name that you assigned. The new printer port appears in the list of available ports. Click Next. You are prompted to launch other setup wizards. P1095460-001 ZT510 User Guide 6/28/17..
• Page 101 Check the desired options, and then click Finish. The printer driver is installed. If you are prompted that other programs might be affected, click the appropriate option to continue. The installation for wireless communication is complete. 6/28/17 ZT510 User Guide P1095460-001..

• Page 102: Print A Test Label And Make Adjustments

  To print a test label and adjust the printer (if necessary), complete these steps: Open the Zebra Setup Utilities to return to the Zebra Setup Utilities screen. Click on one of the available print drivers for your printer.
• Page 103 Click Send to print a printer configuration label. If your connection is working correctly and your printer is correctly loaded with media and ribbon (if used), a printer configuration label prints. Figure 14 • Sample Printer Configuration Label 6/28/17 ZT510 User Guide P1095460-001..
• Page 104 If necessary, modify the printer’s settings to make them match your computer’s settings. Diagnostics and Troubleshooting on page 215. The label prints, but with poor quality or other issues P1095460-001 ZT510 User Guide 6/28/17..

• Page 105: Printer Configuration And Adjustment

  Printer Configuration and Adjustment This section assists you with configuration of and adjustments to the printer. Contents Adjust Printer Settings .....106 Calibrate the Ribbon and Media Sensors .

• Page 106: Adjust Printer Settings

  • The printer’s web pages when the printer has an active wired or wireless print server connection See the ZebraNet Wired and Wireless Print Servers User Guide for more information. Copies of the referenced manuals are available at http://www.zebra.com/manuals. P1095460-001 ZT510 User Guide..
• Page 107 PORTS MENU* — BLUETOOTH MENU* — MIN SECURITY MODE — VIRTUAL DEVICE — SETTINGS MENU* — SENSORS MENU* * Denotes a shortcut to the next user menu. ** Appears in multiple user menus for your convenience. 6/28/17 ZT510 User Guide P1095460-001..

• Page 108: Darkness

  Optimal Darkness and Speed Test on page 225 to determine the best darkness setting. 30.0 Accepted values: Related ZPL command(s): print.tone SGD command used: View and Modify Printer Settings > General Setup > Darkness Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 109: Print Speed

  Select the speed, in inches per second (ips), for printing a label. Slower print speeds typically yield better print quality. 203 dpi = Accepted values: 300 dpi = Related ZPL command(s): media.speed SGD command used: 6/28/17 ZT510 User Guide P1095460-001..

• Page 110: Media Type

  Types of Media on page 22 for more information. Related ZPL command(s): ezpl.media_type SGD command used: View and Modify Printer Settings > Media Setup > Media Type Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 111: Print Method

  THERMAL TRANS Accepted values: • —Uses direct thermal media and no ribbon. DIRECT THERMAL • Related ZPL command(s): ezpl.print_method SGD command used: View and Modify Printer Settings > Media Setup > Print Method Printer web page: 6/28/17 ZT510 User Guide P1095460-001..

• Page 112: Tear Off

  • Higher numbers move the media out of the printer (the tear line moves closer to the leading edge of the next label). –120 Accepted values: Related ZPL command(s): ezpl.tear_off SGD command used: View and Modify Printer Settings > General Setup > Tear Off Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 113: Print Width

  ^POI ZPL II command. 203 dpi = 0002 300 dpi = 0002 1248 Related ZPL command(s): ezpl.print_width SGD command used: View and Modify Printer Settings > Media Setup > Print Width Printer web page: 6/28/17 ZT510 User Guide P1095460-001..

• Page 114: Print Mode

  DELAYED CUT • LINERLESS PEEL • LINERLESS REWIND • LINERLESS TEAR • APPLICATOR • Related ZPL command(s): media.printmode SGD command used: View and Modify Printer Settings > General Setup > Print Mode Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 115: Label Top

  • Positive numbers move the image farther down on the label (away from the printhead) by the specified number of dots. –120 +120 Accepted values: Related ZPL command(s): media.printmode SGD command used: View and Modify Printer Settings > General Setup > Print Mode Printer web page: 6/28/17 ZT510 User Guide P1095460-001..

• Page 116: Left Position

  • Positive numbers move the edge of the image toward the right edge of the label. –9999 9999 Accepted values: Related ZPL command(s): zpl.left_position SGD command used: View and Modify Printer Settings > Advanced Setup > Left Position Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 117: Reprint Mode

  When reprint mode is enabled, you can reprint the last label printed by pressing and holding or by pressing the when at the printer’s Idle Display. PAUSE + CANCEL DOWN ARROW Accepted values: • • Related ZPL command(s): ezpl.reprint_mode SGD command used: 6/28/17 ZT510 User Guide P1095460-001..

• Page 118: Label Length Max

  7.0 inches (178 mm). Label length (including interlabel gap) Interlabel gap Minimum label length value Related ZPL command(s): ezpl.label_length_max SGD command used: View and Modify Printer Settings > Media Setup > Maximum Length Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 119: Print Information

  • stored in RAM or Flash memory. —Prints the previous six labels. • —Shows the sensor settings compared to actual sensor SENSOR PROFILE • readings. To interpret the results, see Sensor Profile on page 228. 6/28/17 ZT510 User Guide P1095460-001..
• Page 120 SENSOR PROFILE: Hold during printer power-up. FEED + CANCEL View and Modify Printer Settings > Print Listings on Label Printer web page: Figure 16 • Sample Network Figure 15 • Sample Printer Configuration Label Configuration Label P1095460-001 ZT510 User Guide 6/28/17..

• Page 121: Idle Display

  Select the information shown on the printer’s display when the printer is idle. FW VERSION Accepted values: • IP ADDRESS • MM/DD/YY 24 HR • MM/DD/YY 12 HR • DD/MM/YY 24 HR • DD/MM/YY 12 HR • device.idle_display_format SGD command used: device.idle_display_value 6/28/17 ZT510 User Guide P1095460-001..

• Page 122: Power Up Action

  —Sets the media and web thresholds without adjusting sensor SHORT CAL • gain, determines the label length, and feeds the media to the next web. Related ZPL command(s): ezpl.power_up_action SGD command used: View and Modify Printer Settings > Calibration Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 123: Head Close Action

  —Sets the media and web thresholds without adjusting sensor SHORT CAL • gain, determines the label length, and feeds the media to the next web. Related ZPL command(s): ezpl.head_close_action SGD command used: View and Modify Printer Settings > Calibration Printer web page: 6/28/17 ZT510 User Guide P1095460-001..

• Page 124: Load Defaults

  —Reinitializes the printer’s wired or wireless print server. With NETWORK • a wireless print server, the printer also reassociates with your wireless network. —Loads settings from the last permanent save. LAST SAVED • FACTORY: ^JUF Related ZPL command(s): NETWORK: ^JUN LAST SAVED: ^JUR P1095460-001 ZT510 User Guide 6/28/17..
• Page 125 LAST SAVED: N/A FACTORY: View and Modify Printer Settings > Restore Default Printer web page: Configuration NETWORK: Print Server Settings > Reset Print Server LAST SAVED: View and Modify Printer Settings > Restore Saved Configuration 6/28/17 ZT510 User Guide P1095460-001..

• Page 126: Media/ribbon Cal

  View and Modify Printer Settings > Calibration Do not change these settings unless you are told to do so Important • by Zebra Technical Support or by an authorized service technician. P1095460-001 ZT510 User Guide 6/28/17..

• Page 127: Diagnostic Mode

  227. DISABLED Accepted values: • ENABLED • to enable, to disable Related ZPL command(s): device.diagnostic_print SGD command used: Hold for 2 seconds when the printer is in the Ready state. Control panel key(s): PAUSE FEED 6/28/17 ZT510 User Guide P1095460-001..

• Page 128: Energy Star

  Press any button on the control panel to bring the printer back to an active state. Accepted values: • • power.energy_star.enable SGD command used: power.energy_star_timeout (to set the amount of idle time before Energy Star is invoked) P1095460-001 ZT510 User Guide 6/28/17..

• Page 129: Config Info To Usb

  Printer Home Page > View Printer Configuration Printer web page: (to view printer configuration information on your web browser) View and Modify Printer Settings > Print Listings on Label (to print the configuration information on labels) 6/28/17 ZT510 User Guide P1095460-001..

• Page 130: Zbi Enabled

  PASSWORD PROTECT — PRINT TEST FORMAT Zebra Basic Interpreter (ZBI 2.0™) is a programming option that may be purchased for your printer. If you would like to purchase this option, contact your Zebra reseller for more information. (identifies if the ZBI 2.0 option is enabled or disabled on the zbi.key..

• Page 131: Run Zbi Program

  DOWN ARROW Press to select . If no program exists, the option does not RIGHT SELECT perform an action. Related ZPL command(s): zbi.control.run SGD command used: Printer Home Page > Directory Listing Printer web page: 6/28/17 ZT510 User Guide P1095460-001..

• Page 132: Stop Zbi Program

  If necessary, use the to select the file from this menu. UP ARROW DOWN ARROW Press to select RIGHT SELECT STOP Related ZPL command(s): zbi.control.terminate SGD command used: Printer Home Page > Directory Listing Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 133: Print Usb File

  SELECT ALL USB Flash drive. Use the to select a file from this menu. UP ARROW DOWN ARROW Press to select RIGHT SELECT PRINT usb.host.read_list SGD command used: 6/28/17 ZT510 User Guide P1095460-001..

• Page 134: Copy Usb File To E

  SELECT ALL the USB Flash drive. Use the to select a file from this menu. UP ARROW DOWN ARROW Press to select RIGHT SELECT STORE usb.host.read_list SGD command used: P1095460-001 ZT510 User Guide 6/28/17..

• Page 135: Store E: File To Usb

  SELECT ALL from the printer on the USB Flash drive. Use the to select a file from this menu. UP ARROW DOWN ARROW Press to select RIGHT SELECT STORE usb.host.write_list SGD command used: 6/28/17 ZT510 User Guide P1095460-001..

• Page 136: Print Station

  For more information about using the command or the SGD commands related to this feature, refer to the Zebra Programming Guide. You can download a copy of the manual from http://www.zebra.com/manuals/. (must be set to ON) usb.host.keyboard_input..

• Page 137: Password Protect

  — PRINT TEST FORMAT Select the level of password protection for user menu items. The default printer password is 1234 NONE Accepted values: • SELECTED • • (to change the printer password) Related ZPL command(s): 6/28/17 ZT510 User Guide P1095460-001..

• Page 138: Print Test Format

  . Hold until the first control panel light PAUSE PAUSE turns off. (Formerly called a PAUSE self test.)* * This test sequence prints a large number of labels. See PRINT LINE on page 222 additional information. P1095460-001 ZT510 User Guide 6/28/17..

• Page 139: Active Print Server

  ESSID — CHANNEL — SIGNAL — IP PORT — IP ALTERNATE PORT — PRINT INFORMATION — RESET NETWORK — VISIBILITY AGENT — LOAD DEFAULTS View whether the wired or wireless print server is currently active. 6/28/17 ZT510 User Guide P1095460-001..

• Page 140: Primary Network

  IP ALTERNATE PORT — PRINT INFORMATION — RESET NETWORK — VISIBILITY AGENT — LOAD DEFAULTS View or modify whether the wired or wireless print server is considered primary. You may select which one is primary. P1095460-001 ZT510 User Guide 6/28/17..

• Page 141: Wired Ip Address

  IP Address Changing on page 244 for additional information. for each field Accepted values: Related ZPL command(s): internal_wired.ip.addr SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: TCP/IP Settings 6/28/17 ZT510 User Guide P1095460-001..

• Page 142: Wired Subnet Mask

  IP Address Changing on page 244 for additional information. for each field Accepted values: Related ZPL command(s): internal_wired.ip.netmask SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: TCP/IP Settings P1095460-001 ZT510 User Guide 6/28/17..

• Page 143: Wired Gateway

  IP Address Changing on page 244 for additional information. for each field Accepted values: Related ZPL command(s): internal_wired.ip.gateway SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: TCP/IP Settings 6/28/17 ZT510 User Guide P1095460-001..

• Page 144: Wired Ip Protocol

  • RARP • BOOTP • DHCP • DHCP & BOOTP • PERMANENT • Related ZPL command(s): internal_wired.ip.protocol SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: TCP/IP Settings P1095460-001 ZT510 User Guide 6/28/17..

• Page 145: Wired Mac Address

  VISIBILITY AGENT — LOAD DEFAULTS View the Media Access Control (MAC) address of the wired print server. internal_wired.mac_addr SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: TCP/IP Settings 6/28/17 ZT510 User Guide P1095460-001..

• Page 146: Wlan Ip Address

  IP Address Changing on page 244 for additional information. for each field Accepted values: Related ZPL command(s): ip.addr wlan.ip.addr SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: Wireless Setup P1095460-001 ZT510 User Guide 6/28/17..

• Page 147: Wlan Subnet Mask

  IP Address Changing on page 244 for additional information. for each field Accepted values: Related ZPL command(s): wlan.ip.netmask SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: Wireless Setup 6/28/17 ZT510 User Guide P1095460-001..

• Page 148: Wlan Gateway

  IP Address Changing on page 244 for additional information. for each field Accepted values: Related ZPL command(s): wlan.ip.gateway SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: Wireless Setup P1095460-001 ZT510 User Guide 6/28/17..

• Page 149: Wlan Ip Protocol

  • RARP • BOOTP • DHCP • DHCP & BOOTP • PERMANENT • Related ZPL command(s): wlan.ip.protocol SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: Wireless Setup 6/28/17 ZT510 User Guide P1095460-001..

• Page 150: Wlan Mac Address

  VISIBILITY AGENT — LOAD DEFAULTS View the Media Access Control (MAC) address of the wireless print server. wlan.mac_addr SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: Wireless Setup P1095460-001 ZT510 User Guide 6/28/17..

• Page 151: Essid

  This setting, which cannot be modified from the control panel, gives the ESSID for the current wireless configuration. 32-character alphanumeric string (default Accepted values: wlan.essid SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: Wireless Setup 6/28/17 ZT510 User Guide P1095460-001..

• Page 152: Channel

  LOAD DEFAULTS View the wireless channel being used when the wireless network is active and authenticated. wlan.channel SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: Wireless Setup P1095460-001 ZT510 User Guide 6/28/17..

• Page 153: Signal

  — LOAD DEFAULTS View the wireless signal strength when the wireless network is active and authenticated. wlan.signal_strength SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: Wireless Setup 6/28/17 ZT510 User Guide P1095460-001..
• Page 154 Normal TCP communications from the host should be directed to this port. internal_wired.ip.port SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: TCP/IP Settings P1095460-001 ZT510 User Guide 6/28/17..

• Page 155: Ip Alternate Port

  Print servers supporting this command will monitor both the primary port and the Note • alternate port for connections at the same time. internal_wired.ip.port_alternate SGD command used: View and Modify Printer Settings > Network Communications Setup > Printer web page: TCP/IP Settings 6/28/17 ZT510 User Guide P1095460-001..

• Page 156: Reset Network

  You must reset the print server to allow changes to the network settings to take Important • effect. Related ZPL command(s): device.reset SGD command used: Print Server Settings > Reset Print Server Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 157: Visibility Agent

  LOAD DEFAULTS When the printer is connected to a wired or wireless network, it will attempt to connect to Zebra’s Asset Visibility Service via the Cloud-based Zebra Printer Connector using an encrypted, certificate-authenticated web socket connection. The printer sends Discovery Data and Settings and Alerts Data.

• Page 158: Language

  Related ZPL command(s): display.language SGD command used: View and Modify Printer Settings > General Setup > Language Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 159: Command Language

  Adjust Printer Settings LANGUAGE > COMMAND LANGUAGE LANGUAGE — LANGUAGE — COMMAND LANGUAGE — COMMAND CHAR — CONTROL CHAR — DELIMITER CHAR — ZPL MODE — VIRTUAL DEVICE View or select the appropriate command language. 6/28/17 ZT510 User Guide P1095460-001..

• Page 160: Command Char

  If you are setting the value through the control panel, the printer will skip any value that is already in use. Accepted values: Related ZPL command(s): zpl.caret SGD command used: View and Modify Printer Settings > ZPL Control Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 161: Control Char

  Set the control prefix character to match what is used in your label formats. Accepted values: Related ZPL command(s): zpl.control_character SGD command used: View and Modify Printer Settings > ZPL Control Printer web page: 6/28/17 ZT510 User Guide P1095460-001..

• Page 162: Delimiter Char

  II format instructions. Set the delimiter character to match what is used in your label formats. Accepted values: Related ZPL command(s): zpl.delimiter SGD command used: View and Modify Printer Settings > ZPL Control Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 163: Zpl Mode

  The printer remains in the selected mode until it is changed in one of the ways listed here. ZPL II Accepted values: • • Related ZPL command(s): zpl.zpl_mode SGD command used: View and Modify Printer Settings > ZPL Control Printer web page: 6/28/17 ZT510 User Guide P1095460-001..

• Page 164: Virtual Device

  If any Virtual Device apps are installed on your printer, you may view or enable/disable them from this user menu. For more information about Virtual Devices, go to the User Guide for the appropriate Virtual Device, or contact your local reseller. P1095460-001 ZT510 User Guide 6/28/17..

• Page 165: Sensor Type

  The transmissive sensor typically is used for other media types. TRANSMISSIVE Accepted values: • REFLECTIVE • Related ZPL command(s): device.sensor_select SGD command used: View and Modify Printer Settings > Media Setup Printer web page: 6/28/17 ZT510 User Guide P1095460-001..

• Page 166: Label Sensor

  Set the sensitivity of the label sensor. This value is set during sensor calibration. Do not change this setting unless you Important • are told to do so by Zebra Technical Support or by an authorized service technician. Accepted values: ezpl.label_sensor SGD command used: View and Modify Printer Settings >..

• Page 167: Take Label

  Set the intensity of the take label LED. This value is set during sensor calibration. Do not change this setting unless you Important • are told to do so by Zebra Technical Support or by an authorized service technician. Accepted values: ezpl.take_label SGD command used: View and Modify Printer Settings >..

• Page 168: Baud Rate

  Accepted values: • 57600 • 38400 • 28800 • 19200 • 14400 • 9600 • 4800 • Related ZPL command(s): comm.baud SGD command used: View and Modify Printer Settings > Serial Communications Setup Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 169: Data Bits

  Select the data bits value that matches the one being used by the host computer. Accepted values: Related ZPL command(s): comm.data_bits SGD command used: View and Modify Printer Settings > Serial Communications Setup Printer web page: 6/28/17 ZT510 User Guide P1095460-001..

• Page 170: Parity

  Select the parity value that matches the one being used by the host computer. NONE Accepted values: • EVEN • • Related ZPL command(s): comm.parity SGD command used: View and Modify Printer Settings > Serial Communications Setup Printer web page: P1095460-001 ZT510 User Guide 6/28/17..

• Page 171: Host Handshake

  Select the handshake protocol that matches the one being used by the host computer. XON/XOFF Accepted values: • RTS/CTS • DSR/DTR • Related ZPL command(s): comm.handshake SGD command used: View and Modify Printer Settings > Serial Communications Setup Printer web page: 6/28/17 ZT510 User Guide P1095460-001..
• Page 172 Printer Configuration and Adjustment Adjust Printer Settings PORTS > WML PORTS — BAUD RATE — DATA BITS — PARITY — HOST HANDSHAKE — WML View the Wireless Markup Language (WML) version. This value cannot be changed. P1095460-001 ZT510 User Guide 6/28/17..

• Page 173: Bluetooth Address

  Adjust Printer Settings BLUETOOTH > BLUETOOTH ADDRESS BLUETOOTH — BLUETOOTH ADDRESS — MODE — DISCOVERY — CONNECTED — BT SPEC VERSION — MIN SECURITY MODE View the printer’s Bluetooth Device Address bluetooth.address SGD command used: 6/28/17 ZT510 User Guide P1095460-001..

• Page 174: Mode

  Adjust Printer Settings BLUETOOTH > MODE BLUETOOTH — BLUETOOTH ADDRESS — MODE — DISCOVERY — CONNECTED — BT SPEC VERSION — MIN SECURITY MODE View the Bluetooth connection pair printer’s device type—Slave (typical) or Master. P1095460-001 ZT510 User Guide 6/28/17..

• Page 175: Discovery

  CONNECTED — BT SPEC VERSION — MIN SECURITY MODE Select if the printer is “Discoverable” for Bluetooth device pairing. ON—Enables Bluetooth discoverable mode. Accepted values: • OFF—Disables Bluetooth discoverable mode. • bluetooth.discoverable SGD command used: 6/28/17 ZT510 User Guide P1095460-001..

• Page 176: Connected

  Adjust Printer Settings BLUETOOTH > CONNECTED BLUETOOTH — BLUETOOTH ADDRESS — MODE — DISCOVERY — CONNECTED — BT SPEC VERSION — MIN SECURITY MODE View the Bluetooth connection status to its paired device (Yes or No). P1095460-001 ZT510 User Guide 6/28/17..

• Page 177: Bt Spec Version

  Adjust Printer Settings BLUETOOTH > BT SPEC VERSION BLUETOOTH — BLUETOOTH ADDRESS — MODE — DISCOVERY — CONNECTED — BT SPEC VERSION — MIN SECURITY MODE View the Bluetooth operational specification level. bluetooth.radio_version SGD command used: 6/28/17 ZT510 User Guide P1095460-001..

• Page 178: Min Security Mode

  Adjust Printer Settings BLUETOOTH > MIN SECURITY MODE BLUETOOTH — BLUETOOTH ADDRESS — MODE — DISCOVERY — CONNECTED — BT SPEC VERSION — MIN SECURITY MODE View the printer’s Bluetooth minimum level of applied security. P1095460-001 ZT510 User Guide 6/28/17..

• Page 179: Calibrate The Ribbon And Media Sensors

  CANCEL • Send the ezpl.manual_calibration SGD command to the printer. See the Zebra Programming Guide for more information about this command. • Navigate to the following menu item on the control panel display. This item is located under the TOOLS menu and the SENSORS menu. Press..
• Page 180 Open the printhead assembly by rotating the printhead-open lever upward. Extend the media approximately 8 in. (203 mm) out of the printer. Remove the exposed labels so that only the liner remains. P1095460-001 ZT510 User Guide 6/28/17..
• Page 181 Calibrate the Ribbon and Media Sensors Pull the media into the printer so that only the backing is in the sensor. Remove the ribbon (if used). Rotate the printhead-open lever downward until it locks the printhead in place. 6/28/17 ZT510 User Guide P1095460-001..

• Page 182: Please Wait

  When the process is complete: The SUPPLIES light stops flashing. • The PAUSE light flashes yellow. • The control panel displays: • RELOAD ALL CONTINUE Open the printhead assembly by rotating the printhead-open lever upward. P1095460-001 ZT510 User Guide 6/28/17..
• Page 183 Calibrate the Ribbon and Media Sensors Pull the media forward until a label is positioned under the media sensors. Reload the ribbon (if used). Rotate the printhead-open lever downward until it locks the printhead in place. 6/28/17 ZT510 User Guide P1095460-001..
• Page 184 Printer Configuration and Adjustment Calibrate the Ribbon and Media Sensors Close the media door. Press to enable printing. PAUSE P1095460-001 ZT510 User Guide 6/28/17..

• Page 185: Adjust The Printhead Pressure And Toggle Position

  • media may move from side to side during printing • printing may be too light or too dark on one side of the media Figure 17 • Printhead Pressure Toggles Inside toggle Outside toggle 6/28/17 ZT510 User Guide P1095460-001..

• Page 186: Toggle Position Adjustment

  To adjust the printhead toggle positions, complete these steps: 1. Rotate the printhead-open lever upward to lessen the pressure on the toggles. 2. Loosen the locking nut at the top of the toggle to be moved. P1095460-001 ZT510 User Guide 6/28/17..
• Page 187 3. Reposition the toggle as necessary to provide even pressure on the media. For extremely narrow media, position the inside toggle over the center of the media, and decrease the pressure on the outside toggle. 4. Tighten the locking nut. 6/28/17 ZT510 User Guide P1095460-001..

• Page 188: Printhead Pressure Adjustment

  3. Initiate the PRINT LINE option of PRINT TEST FORMAT on page 138. 4. While printing labels, use the control panel to lower the darkness setting until the labels are printing gray instead of black. (See DARKNESS on page 108.) P1095460-001 ZT510 User Guide 6/28/17..
• Page 189 9. While printing labels, use the control panel to raise the darkness setting until the labels are again printing black instead of gray. (See DARKNESS on page 108.) 10. Check the print quality, and if necessary, repeat this procedure until the printhead pressure is adequate. 6/28/17 ZT510 User Guide P1095460-001..

• Page 190: Remove Used Ribbon

  Doing so may damage the spindle. While holding the ribbon take-up spindle, turn the ribbon release knob to the left until it stops. The ribbon release bars pivot down, easing the spindle’s grip on the used ribbon. P1095460-001 ZT510 User Guide 6/28/17..
• Page 191 After the ribbon release bars have pivoted down, if possible, turn the ribbon take-up spindle one full to the right to help loosen the ribbon on the spindle. Slide the used ribbon off of the ribbon take-up spindle and discard. 6/28/17 ZT510 User Guide P1095460-001..

• Page 192: Install The Rewind/liner Take-up Plate

  The rewind/liner take-up plate is used in different positions for Rewind mode versus Peel mode or Applicator Mode. Peel Mode/Applicator Mode To install the rewind/liner take-up plate for Peel mode or Applicator mode: Loosen the two knurled nuts on the outside stud on the printer’s base. P1095460-001 ZT510 User Guide 6/28/17..
• Page 193 Install the Rewind/Liner Take-Up Plate Align the large holes of the keyholes in the rewind/peel plate over the knurled nuts, and then slide the plate down until it hits the studs. Tighten the two knurled nuts. 6/28/17 ZT510 User Guide P1095460-001..

• Page 194: Rewind Mode

  Install the Rewind/Liner Take-Up Plate Rewind Mode To install the rewind/liner take-up plate for Rewind mode: Align the upper and lower lips of the rewind plate with the slots in the print mechanism and the rewind assembly. P1095460-001 ZT510 User Guide 6/28/17..
• Page 195 Printer Configuration and Adjustment Install the Rewind/Liner Take-Up Plate Slide the plate into the slots until it stops. 6/28/17 ZT510 User Guide P1095460-001..
• Page 196 Printer Configuration and Adjustment Install the Rewind/Liner Take-Up Plate ___________________________________________________________________ Notes • __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ P1095460-001 ZT510 User Guide 6/28/17..

• Page 197: Routine Maintenance

  Routine Maintenance This section provides routine cleaning and maintenance procedures. Contents Cleaning Schedule and Procedures....198 Clean the Exterior, the Media Compartment, and the Sensors .

• Page 198: Cleaning Schedule And Procedures

  Take-label sensor Air blow Once every six months. * Zebra recommends using the Preventive Maintenance Kit (p/n 47362 or p/n 105950-035 - multipack). In place of this kit, you may use a clean swab dipped in 99.7% isopropyl alcohol. P1095460-001..

• Page 199: Clean The Exterior, The Media Compartment, And The Sensors

  You may clean the exterior surfaces of the printer with a lint-free cloth and a small amount of a mild detergent, if necessary. Do not use harsh or abrasive cleaning agents or solvents. Zebra is not responsible for damage caused by the use of cleaning fluids on this Important •..

• Page 200: Clean The Printhead And Platen Roller

  You are not required to turn off the printer power when working near an open printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose all temporary settings, such as label formats, and you must reload them before you resume printing.
• Page 201 Open the printhead assembly by rotating the printhead-open lever upward. Remove the ribbon (if used) and the media. Using the swab from a Zebra Preventive Maintenance Kit, wipe along the brown strip on the printhead assembly from end to end. In place of the Preventive Maintenance Kit, you may use a clean swab dipped in 99.7% isopropyl alcohol.
• Page 202 Reload the ribbon (if used) and the media. For instructions, see Load the Ribbon on page 62 Load the Media on page Rotate the printhead-open lever downward until it locks the printhead in place. P1095460-001 ZT510 User Guide 6/28/17..
• Page 203 If performing this procedure does not improve print quality, try cleaning the Note • printhead with Save-A-Printhead cleaning film. This specially coated material removes contamination buildup without damaging the printhead. Call your authorized Zebra reseller for more information. 6/28/17 ZT510 User Guide..

• Page 204: Clean And Lubricate The Cutter Module

  Caution • Turn off ( O ) the printer and disconnect it from the power source before performing the following procedure. Turn off (O) the printer and disconnect the AC power cord. Raise the media door. Remove the media from the cutter module. P1095460-001 ZT510 User Guide 6/28/17..
• Page 205 Routine Maintenance Cleaning Schedule and Procedures Remove the cutter catch tray (if used). Loosen and remove the thumbscrew and lock washer on the cutter shield. 6/28/17 ZT510 User Guide P1095460-001..
• Page 206 If the blade is… Then… Continue with step 8 to remove the cutter module from the Lowered printer so that you can rotate the blade upward. Skip to step 9 on page 209. Fully exposed P1095460-001 ZT510 User Guide 6/28/17..
• Page 207 ) in the printer, and then lift the cutter module out of the printer. Take care not to damage the wires that connect the cutter module to the printer. If desired, you may disconnect these wires. 6/28/17 ZT510 User Guide P1095460-001..
• Page 208 ) with the corresponding 8-e. slots ( ) in the printer, and then slide the cutter assembly back into the printer. Take care not to damage the wires that connect the cutter module to the printer. P1095460-001 ZT510 User Guide 6/28/17..
• Page 209 Using the swab from the Preventive Maintenance Kit (part number 47362), wipe along the upper cutting surface and the cutter blade. In place of the Preventive Maintenance Kit, you may use a clean swab dipped in 99.7% isopropyl alcohol. Allow the solvent to evaporate. 6/28/17 ZT510 User Guide P1095460-001..
• Page 210 PTFE oil lubricant. Apply an even layer along all exposed surfaces of both cutter blades. Remove any excess oil so that none of it comes in contact with the printhead or platen roller. P1095460-001 ZT510 User Guide 6/28/17..
• Page 211 Replace the cutter shield and secure it with the thumbscrew and lock washer that you removed earlier. Reinstall the media. Close the media door. Plug the printer into its power source, and then turn on ( ) the printer. The cutter blade returns to its operating position. 6/28/17 ZT510 User Guide P1095460-001..
• Page 212 Routine Maintenance Cleaning Schedule and Procedures Reinstall the cutter catch tray (if used). If the cutter continues to perform unsatisfactorily, contact an authorized service technician. P1095460-001 ZT510 User Guide 6/28/17..

• Page 213: Replacing Printer Components

  For optimal printing quality and proper printer performance across our product line, Zebra strongly recommends the use of genuine Zebra™ supplies as part of the total solution. Specifically, the ZT500 Series printers are designed to work only with genuine Zebra™..
• Page 214 Routine Maintenance Lubrication ___________________________________________________________________ Notes • __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ P1095460-001 ZT510 User Guide 6/28/17..

• Page 215: Diagnostics And Troubleshooting

  This section provides diagnostic tests and other information that may help you to optimize printing or to troubleshoot issues with your printer. For videos of some common procedures, go to http://www.zebra.com/zt500-info. Contents QR Codes and QuickHelp Pages..... . 216 Judging Barcode Quality .

• Page 216: Qr Codes And Quickhelp Pages

  The printer displays a QuickHelp page specific to that error message. This page includes a QR code, such as this. 2. Scan the QR code with a smartphone. Your phone accesses either a video specific to that error message or the Zebra support page for your printer. P1095460-001..

• Page 217: Judging Barcode Quality

  • The normal barcode will be “in-spec.” • Small character alpha numerics will be bold and could be slightly filled in. • The rotated barcode spaces are small when compared to the “in-spec” code, possibly making the code unreadable. 6/28/17 ZT510 User Guide P1095460-001..
• Page 218 • Both normal and rotated barcodes will be in spec, but small alphanumeric characters may not be complete. Too Light Labels that are too light are obvious. • Both normal and rotated barcodes have incomplete bars and spaces. • Small alphanumeric characters are unreadable. P1095460-001 ZT510 User Guide 6/28/17..

• Page 219: Printer Diagnostic Tests

  Note • For best results, use full-width media when performing these diagnostic tests. • If your media is shorter than the image to be printed, the image extends onto multiple • labels. 6/28/17 ZT510 User Guide P1095460-001..

• Page 220: Print Test Format Option

  Use the numbers on the images to determine the best print darkness. If necessary, change your darkness setting to the one that gave you the best results on the above labels. (See DARKNESS on page 108.) P1095460-001 ZT510 User Guide 6/28/17..
• Page 221 The lines on the image print from the label top and left edge to identify what should be the top-left corner of the label. If necessary, use TEAR OFF on page 112 LEFT POSITION on page 116 to adjust the image location. 6/28/17 ZT510 User Guide P1095460-001..

• Page 222: Print Line

  As an alternate way to initiate the PRINT LINE test sequence, reboot the printer while holding . Release when the first control panel light turns off. (Formerly called a PAUSE PAUSE PAUSE self test.) P1095460-001 ZT510 User Guide 6/28/17..

• Page 223: Image Compression

  You can measure the distance between the hash marks or compare the circles and lines to verify if things are being distorted. 6/28/17 ZT510 User Guide P1095460-001..
• Page 224 Diagnostics and Troubleshooting Printer Diagnostic Tests—Print Test Format Option ELEMENT OUT The printer prints a horizontal image designed to show if a printhead element is not functioning. P1095460-001 ZT510 User Guide 6/28/17..

• Page 225: Optimal Darkness And Speed Test

  If you do not have a barcode verifier, use your eyes or the system scanner to choose the optimal darkness setting based on the labels printed in this self test. 6/28/17 ZT510 User Guide P1095460-001..
• Page 226 If necessary, change the darkness value to the darkness value on the best test label. If necessary, change the print speed to the same speed as on the best test label. P1095460-001 ZT510 User Guide 6/28/17..

• Page 227: Communication Diagnostics Test

  • indicates an overrun error. • indicates a parity error. • indicates noise. To exit this self test and return to normal operation, power cycle the printer or set the option to DIAGNOSTIC MODE DISABLED 6/28/17 ZT510 User Guide P1095460-001..

• Page 228: Sensor Profile

  FEED + CANCEL turns off. Using ZPL Send the ~JG command to the printer. See the Zebra Programming Guide for more information about this command. Using the control panel Navigate to the following item under the SENSORS menu.
• Page 229 If the distances are not the same, the printer may be having difficulty determining where the gaps are located. Figure 22 • Sensor Profile (Media Section) 6/28/17 ZT510 User Guide P1095460-001..

• Page 230: Indicator Lights

  PAUSE light steady red DATA light steady red The printhead was replaced with one that is not a genuine Zebra™ printhead. Install a genuine Zebra™ printhead to continue. STATUS light flashing red The printer is unable to read the dpi setting of the printhead.
• Page 231 NETWORK light flashing green WLAN—The radio is associated with your network and authenticated, but the WLAN signal is weak. NETWORK light steady red A WLAN error condition exists. The printer is not connected to your network. 6/28/17 ZT510 User Guide P1095460-001..

• Page 232: Troubleshooting

  Thermal Transfer mode. See PRINT METHOD on page 111. The printhead was replaced Install a genuine Zebra™ PH NOT AUTHENTICATED with one that is not a genuine printhead. REPLACE PRINTHEAD Zebra™ printhead. STATUS light steady red..
• Page 233 If you are using direct thermal Set the printer for Direct media, the printer is waiting Thermal mode. See PRINT for ribbon to be loaded METHOD on page 111. because it is incorrectly set for thermal transfer mode. 6/28/17 ZT510 User Guide P1095460-001..
• Page 234 The printhead data cable is not Call a service technician to properly connected. hook up the printhead properly. The printhead has a faulty Call a service technician to thermistor. replace the printhead. P1095460-001 ZT510 User Guide 6/28/17..
• Page 235 PRINT WIDTH on page 113. STORING BITMAP Ensure that the data is not directed to a device that is not OUT OF MEMORY installed or is unavailable. STORING FONT If the problem persists, call a service technician. 6/28/17 ZT510 User Guide P1095460-001..

• Page 236: Printing Issues

  Switch to a different type of media or ribbon combination of media and to try to find a compatible combination. ribbon for your application. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Incorrect printhead pressure.

• Page 237: Poor Print Quality

  Switch to a different type of media or ribbon combination of labels and to try to find a compatible combination. ribbon for your application. If necessary, consult your authorized Zebra reseller or distributor for information and advice. The printer is set at an incorrect For optimal print quality, set the darkness to the darkness level.

• Page 238: Missing Print

  The printer is out of calibration. Calibrate the printer. See Calibrate the Ribbon form position and Media Sensors on page 179. The platen roller is dirty. Clean the printhead and platen roller. See Clean the Printhead and Platen Roller on page 200. P1095460-001 ZT510 User Guide 6/28/17..
• Page 239 Load the Media on page Incompatible media. You must use media that meets the printer specifications. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed (see Media Specifications on page 269). 6/28/17 ZT510 User Guide P1095460-001..

• Page 240: Ribbon Issues

  Diagnostics and Troubleshooting Troubleshooting—Ribbon Issues Ribbon Issues For videos of some common procedures, go to http://www.zebra.com/zt500-info. Broken Ribbon Issue Possible Cause Recommended Solution Broken or melted Darkness setting too high. Reduce the darkness setting. See ribbon DARKNESS on page 108 for how to change the darkness setting.
• Page 241 The printer was not calibrated Calibrate the printer. See Calibrate the Ribbon that ribbon is out, even for the label and ribbon being and Media Sensors on page 179. though ribbon is used. loaded correctly. 6/28/17 ZT510 User Guide P1095460-001..

• Page 242: Communications Issues

  Check the communication cable length. See print, then the printer General Specifications on page 262 skips, misplaces, misses, or requirements. distorts the image on the Check the printer driver or software label. communications settings (if applicable). P1095460-001 ZT510 User Guide 6/28/17..

• Page 243: Miscellaneous Issues

  If necessary, refer to the Programming Guide for A command in a label format ZPL, ZBI, Set-Get-Do, Mirror, and WML or call Some parameters changed the parameter back to a service technician. changed unexpectedly. the previous setting. 6/28/17 ZT510 User Guide P1095460-001..
• Page 244 WIRED GATEWAY on page 143 Wireless: WLAN IP ADDRESS on page 146 WLAN SUBNET MASK on page 147 WLAN GATEWAY on page 148 Reset the network using RESET NETWORK on page 156 to save the changes. P1095460-001 ZT510 User Guide 6/28/17..

• Page 245: Calibration Issues

  Power cycle the printer. If that does not solve the on, nothing is on the failure. issue, call a service technician. display, and the printer locks up. The printer locks up Main logic board failure. while booting up. 6/28/17 ZT510 User Guide P1095460-001..
• Page 246 Diagnostics and Troubleshooting Troubleshooting—Miscellaneous Issues P1095460-001 ZT510 User Guide 6/28/17..

• Page 247: Using A Usb Host Port And The Nfc Capabilities

  Using a USB Host Port and the NFC Capabilities This section will help you to learn how to use an optional USB host port on your Zebra printer and how to use the printer’s Near Field Communication (NFC) capability. The information is presented in the form of exercises with some SGD commands listed for advanced users.

• Page 248: Items Required For The Exercises

  1 Terabyte (1 TB). The printer will not recognize drives larger than 1 TB. • a USB keyboard • the various files attached below • the free Zebra Utilities app for your smart phone (search for Zebra Tech in the Google Play store) Files for Completing the Exercises Most of the actual files that you need to complete the exercises in these section are attached here.
• Page 249 ^FT40,70^A0N,28,28^FH^FDThis label was printed using a current date, based on your keyboard input. ^FS Real-Time Clock (RTC) setting ^FT35,260^A0N,28,28^FH^FDThis label was printed by:^FS • prints the Zebra logo graphic ^FT33,319^A0N,28,28^FN1'Enter Name'^FS • prints fixed text • prompts you to enter your..
• Page 250 You may want to download a firmware file for your printer and copy it to your computer for use during the exercises. You may omit doing this if you wish. You can download the latest firmware file from http://www.zebra.com/firmware. P1095460-001..

• Page 251: Usb Host

  File 1: ZEBRA.BMP In the folder, place the following files: /commands • File 2: SAMPLELABEL.TXT • File 3: LOGO.ZPL Insert the USB Flash drive into a USB host port on the front of your printer. 6/28/17 ZT510 User Guide P1095460-001..
• Page 252 Change the path to the location on the printer from which mirror files are retrieved: ! U1 setvar 'usb.mirror.path' 'path' Default: 'zebra' Enable/disable the ability to use the USB port: ! U1 setvar 'usb.host.lock_out' 'value' Values: 'on' 'off' P1095460-001 ZT510 User Guide 6/28/17..

• Page 253: Exercise 2: Print A Label Format From A Usb Flash Drive

  SELECT ALL is available to print all files on the USB Flash drive. If necessary, use the up and down arrow to select USBSTOREDFILE.zpl Press the button to select RIGHT SELECT PRINT The label prints. 6/28/17 ZT510 User Guide P1095460-001..

• Page 254: Exercise 3: Copy Files To/from A Usb Flash Drive

  The printer stores the file in memory. All file names are converted to uppercase. Repeat this process to select the file STOREFMTM1.ZPL Press the button to select RIGHT SELECT STORE The printer stores the file in memory. P1095460-001 ZT510 User Guide 6/28/17..

• Page 255: Select All

  The option SELECT ALL is available to store all of the available files from the printer to the USB Flash drive. Any .ZPL file that is copied will be post-processed such that the contents of the file will be suitable to be sent to a printer for normal execution. 6/28/17 ZT510 User Guide P1095460-001..

• Page 256: Exercise 4: Enter Data For A Stored File With A Usb Keyboard And Print A Label

  The printer prompts for the number of labels to print. Specify the desired quantity of labels, and then press again. <ENTER> The specified number of labels is printed, with your name in the appropriate fields. P1095460-001 ZT510 User Guide 6/28/17..

• Page 257: Near Field Communication (nfc)

  Using the USB Host Ports and the NFC Capabilities Near Field Communication (NFC) Near Field Communication (NFC) The Zebra Print Touch™ feature allows you to touch an Android™-based, NFC-enabled device (such as a smart phone or tablet) to the printer’s NFC logo (Figure 23) to pair the device to the printer.

• Page 258: Exercise 5: Enter Data For A Stored File With A Smart Device And Print A Label

  Bluetooth interface. A copy of this manual is available at http://www.zebra.com/manuals. If you do not have the Zebra Utilities app installed on your device, go to the app store for your device, search for the Zebra Utilities app, and install it.
• Page 259 Using the USB Host Ports and the NFC Capabilities Near Field Communication (NFC) Start the Zebra Utilities app on your device. The Zebra Utilities main menu displays. Perform these steps if you have an Apple device: Tap the icon in the lower-right corner.
• Page 260 Using the USB Host Ports and the NFC Capabilities Near Field Communication (NFC) ___________________________________________________________________ Notes • __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ P1095460-001 ZT510 User Guide 6/28/17..

• Page 261: Specifications

  Specifications This section lists general printer specifications, printing specifications, ribbon specifications, and media specifications. Contents General Specifications .....262 Power Specifications .

• Page 262: General Specifications

  Many mobile devices can communicate with the printer within a 30-foot radius of the printer. Connections and Configuration Refer to the Zebra Bluetooth User Guide for specific instructions for configuring your printer to use a Bluetooth interface. A copy of this manual is available at http://www.zebra.com/manuals.
• Page 263 • Can be installed only in the top option slot. • Configuration Refer to the ZebraNet Wired and Wireless Print Servers User Guide for configuration instructions. A copy of this manual is available at http://www.zebra.com/manuals. 6/28/17 ZT510 User Guide P1095460-001..
• Page 264 Connections and Configuration No additional configuration is necessary. External ZebraNet 10/100 Print Server Requires the parallel data interface option Memory 1 Gigabyte DRAM (32 MB user available) 2 Gigabyte Flash (512 MB user available on-board Flash) P1095460-001 ZT510 User Guide 6/28/17..

• Page 265: Power Specifications

  90–265 VAC, 47-63 Hz Power consumption 120 VAC, 60 Hz Inrush Current (Irms) 37.0 Idle Power (Watts) Idle Power (VA) 13.1 Sleep Power (Watts) Sleep Power (VA) 10.4 Print Power (Watts) 123.0 Print Power (VA) 130.0 6/28/17 ZT510 User Guide P1095460-001..

• Page 266: Power Cord Specifications

  IEC 320 connector—This should bear the certification mark of at least one of the known international safety organizations (Figure 25). Length ≤ 9.8 ft. (3 m). Rating 10 Amp, 250 VAC. Figure 25 • International Safety Organization Certification Symbols P1095460-001 ZT510 User Guide 6/28/17..

• Page 267: Wireless Specifications

  OFDM (16-QAM and 64-QAM with BPSK and • QPSK) RF power 17.89 dBm (EIRP) • 802.11 ac 5.15-5.25 GHz, 5.25-5.35 GHz, 5.47-5.725 GHz • OFDM (16-QAM and 64-QAM with BPSK and • QPSK) RF power 13.39 dBm (EIRP) • 6/28/17 ZT510 User Guide P1095460-001..

• Page 268: Printing Specifications

  3.3 mil to 49 mil Ladder (rotated) 203 dpi 4.9 mil to 49 mil orientation 300 dpi 3.9 mil to 39 mil Vertical registration 6 ips ±0.75 mm > 6 ips ±1.5 mm Horizontal registration ±1.5 mm P1095460-001 ZT510 User Guide 6/28/17..

• Page 269: Media Specifications

  Black mark length (parallel to inside media edge) 0.12 to 0.43 in. (3 to 11 mm) Black mark width (perpendicular to inside media edge) > 0.43 in. (> 11 mm) Black mark location within 0.040 in. (1 mm) of inside media edge 6/28/17 ZT510 User Guide P1095460-001..

• Page 270: Ribbon Specifications

  3.2 in. (81.3 mm) * Zebra recommends using ribbon that is at least as wide as the media to protect the printhead from wear. ** Depending on your application, you may be able to use ribbon narrower than 2 in. (51 mm), as long as the ribbon is wider than the media being used.

• Page 271: Glossary

  Glossary alphanumeric Indicating letters, numerals, and characters such as punctuation marks. backfeed When the printer pulls the media and ribbon (if used) backward into the printer so that the beginning of the label to be printed is properly positioned behind the printhead. Backfeed occurs when operating the printer in Tear-Off and Applicator modes.
• Page 272 Font A complete set of alphanumeric characters in one style of type. Examples include CG Times™, CG Triumvirate Bold Condensed™. ips (inches-per-second) The speed at which the label or tag is printed. Many Zebra printers can print from 1 ips to 14 ips.
• Page 273 The ribbon transfers ink onto the media when heated by the small elements within the printhead. Zebra ribbons have a coating on the back that protects the printhead from wear.
• Page 274 A space on which printing should have occurred, but did not due to an error condition such as wrinkled ribbon or faulty print elements. A void can cause a printed barcode symbol to be read incorrectly or not at all. P1095460-001 ZT510 User Guide 6/28/17..

• Page 275: Index

  Index broken ribbon, 240 buttons on control panel, 18 adhesive test for ribbon coating, 25 adjustments label left position, 116 label top position, 115 calibration maximum label length, 118 Auto Calibrate failed, 245 print darkness, 108 how to set as head-close action, 123 print width, 113 how to set as power-up action, 122 printhead pressure or toggle location, 185..
• Page 276 Index configuration label disposal of printer parts, 213 print through Zebra Setup Utilities, 102 driver installation, 67 various ways to print, 119 conformity declaration, 3 connecting printer to computer or network, 67 electrical specifications, 265 continuous media electronics cover, 14..
• Page 277 238 language how to change from unfamiliar language, 243 languages supported on display, 158 navigation, 19 last saved settings, 124 Near Field Communication (NFC), 257 LCD error messages, 232 limitations and requirements, 262 6/28/17 ZT510 User Guide P1095460-001..
• Page 278 119 print width, 113 print line test labels reprint mode, 117 how to print, 138 settings not taking effect, 243 sample, 222 tear-off position, 112 print method specification, 111 print mode selection, 114 P1095460-001 ZT510 User Guide 6/28/17..
• Page 279 270 stop a ZBI program, 132 when to use, 24 storing the printer, 28 wrinkled ribbon, 240 subnet mask RIBBON IN message, 232 wired, 142 RIBBON OUT message, 233 wireless, 147 surface for printer, 30 6/28/17 ZT510 User Guide P1095460-001..
• Page 280 28 signal, 153 specifications, 267 wrinkled ribbon causes, 240 Zebra Basic Interpreter (ZBI) enable, 130 run a ZBI program, 131 stop a ZBI program, 132 Zebra Global Customer Support, 28 Zebra Printer Connector, 157 P1095460-001 ZT510 User Guide 6/28/17..
• Page 281 Index Zebra Setup Utilities installation, 67 print a test label, 102 ZebraDesigner, 104 ZPL mode, 163 6/28/17 ZT510 User Guide P1095460-001..
• Page 282 Corporate Headquarters Zebra Technologies Corporation 3 Overlook Point Lincolnshire, IL 60069 USA T: +1 847 634 6700 Toll-free +1 866 230 9494 F: +1 847 913 8766 http://www.zebra.com P1095460-001..